nixie + twitter = twixie

Friday, November 12 th , 2010

Photo by Seth Snyder | Thanks Seth!

Three weeks ago, we opened our doors to the general public, and things have been picking up speed. There is a good deal of work being done in the wiki, and all kinds changes are being made out as we speak. As you probably know, there have been a few promotions going on around here, and at the end of this post you will find our biggest promotion yet.

A few months ago I set out to find a use for the nixie tube…

For those who do not know, the nixie tube (pictured above) was a precursor to the 7-segment LED display. But instead of simplifying things and making all numbers come from a series of seven lines, its creators wanted real typography, and not the stuff you could get with 2.5 volts, the kind that only a 170 volt neon tube could bring you. This is the nixie tube, a 170 volt neon tube where each number has its own cathode, which are all stacked on top of each other. So, 11 connections. You connect two, and the number 3 lights up, another two, and it lights up the number 9.

The orange glow is enough to drive a man mad from obsessing over it – but what to do with it? I wanted something that would be for bildr and, if possible, connect to the internet – doesn’t everything need to? So, I decided to do what any self-obsorbed site-creator would do: I was going to make a nixie display that showed the amount of twitter followers bildr had, and then recheck every 30 seconds.

I started by looking at existing projects and looking for kits that may be available for controlling the nixie tubes from an Arduino (my platform of choice). The problems you encounter when going to work with these tubes is that 1: they operate at 170 volts; 2: with 10 control pins per tube, you quickly run out of open pins on your Arduino; 3: they’re not exactly serial. BUT… I found a fix!

A company out of Canada called Ogi Lumen sells open-source parts for controlling nixie and neon tubes that solve all of these issues. They offer a 170v power supply (takes 7-12v in), and they have chainable boards that just plug in next to each other and connect to the Arduino, so if you want 2 or 12 digits, you are set. They even made an Arduino Library that allows you to just give it a number, and it will make it all happen for you. So I ordered a kit that would accommodate 4 tubes.

Because I’m a designer, sadly, I obsess over things I probably shouldn’t. In this case, it was the fact that the nixie tubes used in the Ogi kit are not how I envisioned this project looking. For that, I ordered this crazy kit from Ukraine that was from a war sub, or something, back when they were part of the Soviet Union. I kid you not, when I tell you this – the tubes in this kit were connected to wire that I’m pretty sure was wrapped in some sort of animal skin. Yes… you can buy the tubes separately, but I thought I would save time and money by buying them already mounted. DON’T DO THIS! It’s really not worth dealing with 30-year old animal parts to save a few bucks.

Oh… so this is where my need for a different look came back to bite me. The pins on the nixie tubes in the Ogi kit run counter-clockwise, 1-0. But the pins on the crazy animal-ridden tubes… they run clockwise. So 0 is 1, 9 is 2, 8 is 3, and so on. If that was not bad enough… because the Ogi kit tubes look up, when I attached my tubes to it, they were backwards, facing the back. All I need to do is turn it around, right? Well, yeah, this is what I did, but now digit 1 is digit 4, and 2 is 3, and so on, so our 160 followers (at the time) became 061. Basically, I had to re-do part of the library and re-order the write-out, all because I needed a different look. But it is so beautiful, right?

To control the tubes and connect to the internet, other than the awesome Ogi Lumen kit, I used Sparkfun’s Arduino pro and Seeed Studio’s ethernet shield. Then, I just tied into twitter’s API to grab all of bildr’s followers, and told the nixie tubes to display that number and repeat every 30 seconds. Funny, but the code and electronics was, by far, the easiest part (other than having wires keep breaking on me while prototyping) – the Ogi boards are very thick and make solder reworking harder.

Then, there is the case…. First, let me say this: I went to a school that has the most beautiful wood and metal shops you could imagine. I know how to properly hollow grind a chisel, I have built a 5in bearing out of aluminum using a metal lathe and bridgeport. But, after graduating, I had no more shop access, and it’s really sad. Thankfully, the people over at Ponoko are helping to ease that pain. If you don’t know Ponoko, you need to. They offer laser cutting service that is top notch, offering tons of different materials, and all with great prices, and they provide excellent service.

So, I opened Adobe Illustrator and started designing a box that would wrap around the electronics and sandwich everything together in a way that I could pull it apart when I wanted to change something. I designed a box one layer at a time and placed 1/8in holes in the corners of every piece to place alignment pins in so it would all just come together. About two weeks later, when I got the campfire-smelling package, I was floored. Everything came out so beautiful and clean. All of the pieces fit so well, and the ethernet jack must have had less than 2/1000th of an inch tolerance. It all just fit so perfectly.

But, after gluing the two halves together, I decided to take my box plane and smooth the sides a bit. Again, lacking a shop, the glue-up wasn’t 100% perfect with the lame clamps I had. But, doing this removed half of the burned edges and, again, being obsessed I decided to just go for it. I glued the two halves together (I guess fixing it is out of the question), and planed and sanded all four sides. Then, over the next three days, I did a process of wood fill (the sides of the material were almost sponge-like, not sure what it is), sand, paint, sand, fill, paint, and so on about six times until I had perfectly smooth, sharp-edged, perfectly black sides.

It took a lot of time to make it look great, but in the end I have the coolest looking twitter counter I have ever seen. It is really beautiful in person.

AND!!! You can interact with it by joining our twitter feed ( @bildr ). It checks the stats every 30 seconds, so let’s see how high we can get it.

So, now it’s your turn!!!!

This is what I did with four nixie digits and Ponoko laser cutting. What would you do? I want to hear it, and you may get to make it.

Thanks to Ogi Lumen and Ponoko, the person who comes up with the best idea will get:
Two (2) Ogi Lumen Nixie Duo and Nixie Driver Kits (tubes, controller boards, everything you need to connect to the Arduino (assembly required))
One (1) nixie power supply
$50 to Ponoko for materials and laser cutting (my box cost less than that, including shipping)

I will also help out with any other parts you need to make it happen (within reason)!

So, what are you going to make? Is it a random number generator using a geiger counter? Will it be a countdown to the next Star Wars convention? Is it your longitude on display at all times? Maybe it is a bluetooth display to show the last four digits of an incoming call. It could be anything.

If you have an idea, send us an email at, and let us know what it is. Also, let us know that you know how to make it happen and are comfortable working with a high power system. 170v isn’t a joke, and we want this to go to someone who will actually be able to put it together. Also, note that Ponoko is not available in all areas, and shipping is really expensive to some places, so location may play a small part in our decision.

We will be accepting entries until november 22nd, so get cracking!


SeeedStudio DSO Nano Giveaway

Tuesday, November 2 nd , 2010

It has been just a couple of weeks since we opened, and, while things could be growing faster, we are doing well. The first week we gave away $100 to sparkfun via twitter, the second week we gave away 5x development boards from ProtoStack to users who would help build documentation around them. So now, in the third week, we need something else, right? Well, we do have something else.

Ever find yourself in a situation where you need to know what the output of your microcontroller is? Or maybe you just wish you could see what your sensor is doing? Well, for this, you need an oscilloscope. Most of these are pretty bulky, and if you are like me, you don’t have much desk space. So, for people like me, I announce this week’s something else.

This week’s something else is actually 2 of something. Seeed Studio has sent us 2 of their awesome DSO nano – Pocket size digital storage oscilloscopes to give away. I have to say, these things are so much thinner than I thought they would be, and they are just insanely cool at that. But how do we give these away?… they are too cool for just a normal giveaway. Or, if we do a normal giveaway for one, we need to do something crazy for the other. Should we just give them away at random, or reward a great article in our wiki? Do we send one to someone to write a review? Reward the coolest project? You tell us.

So now it is up to you to let us know how we should determine how to give these away. Tell us what you would do for a DSO Nano (or how we should give them away) via twitter ( @bildr ) or email ( ), and you may end up with one of these on your doorstep.

If the portable oscilloscope is not your thing, stay tuned for more promotions from Ponoko, and ogi lumen.

ProtoStack giveaways! Atmega168 Development kits

Monday, October 25 th , 2010

Image ©Protostack

A week after opening, and things are going good. We just gave away $100 to SparkFun and we are moving ahead to this week’s promotion.

The arduino is bigger than ever, and no one can deny its ease-of-use. But what happens when you find yourself needing more control or flexibility? Well, then it is time to bypass the Arduino bootloader and go right to the microcontroller. I know, I know… it sounds scary, but what if someone made a kit for getting you started?

Well that’s exactly what ProtoStack does. Protostack is a supplier of prototyping boards, development boards and electronic components. Their boards conform to a common form factor (full size and half size) which allows them to be stacked on top of each other (hence the name Protostack). Most of their products are oriented around AVR microcontrollers (same guys who make the microcontrollers on the Arduino) -It’s all aimed at people who want a bit more control and flexibility. Their site even has many AVR tutorials and is ideal for those wanting to learn about embedded systems.

Ok ok ok… Where’s the giveaway? Well… Daniel Garcia over at ProtoStack has generously put up 5 ATmega168 Development Boards to give to bildr users who are looking to step foot in the ATmega arena. All we ask is that you post anything you build with them, or just anything you find out that could help others. We love giving things away, but we also love for you give back to the community by sharing your knowledge (this is bildr afterall).

If you want a kit, and are willing to share your findings, email us at (Sadly they have all been spoken for) and we will get one out to you!

If you are still scared of working with microcontrollers, stay tuned for more promotions from Seed StudioPonoko, and ogi lumen.

« Older Entries